16
Activate Bell Test? Activates the alarm (while disarmed) for about 2 seconds and
performs a battery test. If the alarm does not sound, call for service.
• If the battery is low, a “LOW BATTERY E02-00 SERVICE” will appear in the display
indicating a low battery condition. Allow 24 hours for the battery to recharge. If the
trouble continues, call for service.
Display System Troubles? (Optional) Displays 1- or 2-digit error code along with a
description of a problem detected in the system. (See SYSTEM TROUBLE ERROR
CODES for a full description of these codes.) Use NEXT(E) and PRIOR (F)
to scroll system troubles.
Display Fire Alarms? Displays alarms that have occurred on the Fire Zone(s).
Press the NEXT and PRIOR Buttons to scroll zones.
Display Fire Troubles? Displays trouble conditions that have been detected on the
Fire Zone(s). Use NEXT(E) and PRIOR (F) to scroll zones.
Activate Chime? The Chime Mode will sound a tone at the keypad when the
programmed zone is faulted while disarmed. To deactivate the Chime Mode, re-
enter the Function Mode and when “DEACTIVATE CHIME“ is displayed, press YES
(E). Note: The Chime Mode is disabled while armed.
Activate Watch Mode? (Optional - Watch Mode programmed? qYES qNO) This
optional feature simultaneously turns on all zones designated as Day Zones, which
will cause an indication at the keypad if a zone is opened while the system is
disarmed. To deactivate the Watch Mode, arm, then disarm. All Day Zones will
revert to regular Burglary Zones. Note: The Watch Mode is disabled while armed.
KEYPAD FUNCTIONS
ACTIVATE
BELL TEST Y/N
DISPLAY
SYS TRBL Y/N
DISPLAY
FIRE ALARM Y/N
DISPLAY
FIRE TRBL Y/N
ACTIVATE
CHIME Y/N
ACTIVATE
WATCH Y/N