Gemini GEM-RP1CAe2 User Manual

25
PROGRAMMING (OPTIONAL)
Enter the User Program Mode
1 Enter your User Code, then press AA to enter the Function Mode.
2 Answer NO (press FF) until “ACTIVATE PROGRAM Y/N” is displayed, then press YES
(E).
3 “ENTER USER CODE” will display, press NEXT (E) until the keypad displays the “Enter
Date” screen.
Programming the Date
1 At the Enter Date screen, simply punch in the correct date using the numeric
keypad buttons.
For example, for July 29, 2000, enter: 07 29 00
2 PressJto save the Date
Programming the system Date and Time.
The User Program Mode may also be used to set the system Date and Time which display on the
ACTIVATE
PROGRAM Y/N
ENTER DATE
00/00/00
ENTER DATE
07/29/00
ENTER TIME
(12:00A)
ENTER TIME
(06:30P)
Programming the Time
1 After entering in the Date, press NEXT (E) for the Time Entry screen.
2 At the Enter Time screen, simply punch in the correct time using the numeric keypad
buttons and if necessary, press any numeric button to change the AM display to PM (or vice
versa) For example, for 6:30 PM, enter: 06 30 06 30 (00 if necessary)
3 Press J to save the Time.

Gemini GEM-RP1CAe2 Specifications

General

Brand	Gemini
Model	GEM-RP1CAe2
Category	Keypad
Language	English