31
GLOSSARY
System Trouble: A problem (low
battery, power failure, etc.)
detected in the system.
Trouble: A zone fault; an open door,
window, or other problem that may
prevent arming.
User Code: Your personalized code
for arming and disarming the
system. It may contain up to six
digitsZones: Independent circuits
that protect specific areas of the
premises:
Auto-Bypass Zone: A zone that will
be automatically bypassed from
the protection system if it is in
trouble (faulty) when the system is
armed.
Burglary Zone: Detects intrusion.
Day Zone: A zone that will cause a
visual and audible indication at the
keypad if it is in trouble while
disarmed.
Exit/Entry Follower Zone: Provides
exit and entry delay for interior
devices. Entry delay only occurs if
re-entry takes place through the
normal exit/entry door first.
Fire Zone: Detects fire alarms or
trouble conditions.
Interior Zones: Circuits within the
premises, usually including space-
protection devices, interior doors,
etc.; but not exterior doors or
windows. These can all be
bypassed simultaneously using
the E button. (Two groups of
Interior Zones may be
programmed for each area.)
Priority Zone: A zone that prevents
arming if in trouble.
Priority Zone with Bypass: A
Priority Zone that can be bypassed
using the C button.
Selective-Bypassed Zone: A zone
that can be individually bypassed
using the B button.
24-Hour Zone: A zone that is armed
and ready at all times to respond
to an emergency situation.
To Next Page
Loading...
