Gemini GEM-RP8 User Manual

Emergency Buttons
7 8 9 G
The three sets of emergency buttons, if programmed, are always active whether the system is armed
or disarmed. Discuss these Buttons with your installer. The emergency signal will only be activated
when the two respective buttons are pressed at the same time.
Fire Alarm: Simultaneously press7
+
G to sound a fire alarm, and to alert the central
station of a fire emergency, if so programmed.
Auxiliary Alarm: Simultaneously press
8
+
G
to alert the central station of an auxiliary
emergency, if so programmed. (The nature of this emergency alarm is to be determined by the
installer)
Police Emergency: Simultaneously press
9
+
G
to sound a police emergency alarm,
and to alert the central station of a Police emergency, if so programmed.
7
+
G
Fire
Emergency
Enabled?
Yes
!
No
!
8
+
G
Auxiliary Emergency
Enabled?
Yes
!
No
!
Ambush Alarm
In the event that you are forced by an intruder to disarm your system, the ambush alarm can be
activated. Disarming the system with the Ambush Code will cause the system to disarm and
simultaneously send a silent ambush alarm signal to Central Station. If your system has the Ambush
feature enabled, the code assigned as the User 8 code will function as your Ambush Code.
9
+
G
Police
Emergency
Enabled?
Yes
!
No
!
Ambush Alarm
Enabled?
Yes
!
No
!
EMERGENCY CONDITIONS

Gemini GEM-RP8 Specifications

General

Brand	Gemini
Model	GEM-RP8
Category	Keypad
Language	English