mdj-900 manual • geminsound.com
14
SETTINGS PREFERENCES
(Default in bold)
Options Settings Settings Range Description
Current Song BPM Normal, *2, /2 Allows user to correct double or half BPM analysis
errors
AutoCue On, O Sets the master cue point at the first audible level
AutoCue Level -36dB, -42dB, -48dB, -54dB, -60dB, -66dB, -72dB Sets Autocue detection level
Eject / Load Lock, Unlock Lock media when playing
Time Format Elapsed, Remain Show elapsed or remaining time
Pitch / Tempo Range 4%, 8%, 16%, 24%, 50%, 100% Sets pitch/tempo range
Keylock On, O Turns on Keylock
BPM Mode Auto, Tap, ID3, Man Selects BPM mode
BPM Lock Value, O Sets BPM Lock on or o
Beat Grid On, O Shows beat grid on waveform
Quantize On, O Turns Quantize on or o
Beat Oset On, O Allows manual adjustment of beat grid
Auto Sync On, O Allows auto sync
Player # Auto, 1, 2, 3, 4 Selects Player Number
Emergency Loop On, O Creates 4 beat loop when USB stick is removed
Sound Card 44/16, 48/16, 48/24, 98/24 Sets sound card setting
MIDI Channel 0-15 Sets MIDI Channel
Vinyl Mode On, O Turns Vinyl (scratch) mode on or o
Platter Nudge 1, 2, 3, 4, 5 Determines platter nudge sensitivity
Load Settings from MSD Loads stored settings o mass storage device
Save Settings to MSD Save settings to mass storage device
Reset Settings Reset settings to default values
Software Version Current software version
Exit Exit the menu
Settings are stored and loaded from the USB storage device when one is connected. To manually set or recall your settings, use the
“Load Settings from MSD” or “Save Settings to MSD” features from your settings page in the MDJ-900. The Gemini VCASE software can
also create and set settings data. This allows you to configure one device the way you want it, then export those settings to your other
MDJ devices.
1 - Press the SETTINGS button (17) to see the settings screen.
2 - Use the browse knob (8) to select the settings item.
3 - Set the cursor to the item you want to change, then press the browse knob.
4 - Turn the browse knob to highlight the setting you want.
5 - Press the browse knob to enter the setting. Press the back button to abort the change.
6 - Press back to exit the settings menu.
SETTINGS
To Next Page
Loading...
Need help?
General
