EasyManua.ls Logo

geminox MERITE ZEM 2-17 C User Manual

geminox MERITE ZEM 2-17 C
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Technical instructions
Gas condensing boiler
MERITE
ZEM 2-17 C | ZEM 5-25 C
ZEM 5-25 SEP
6 720 813 321 (2016/06)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the geminox MERITE ZEM 2-17 C and is the answer not in the manual?

geminox MERITE ZEM 2-17 C Specifications

General IconGeneral
MountingWall-mounted
Nominal heat output17 kW
Ignition TypeElectronic
Fuel TypeNatural gas
Water Pressure3 bar (Max)
Safety FeaturesFlame failure detection, Overheating protection

Summary

I - SAFETY PRECAUTIONS

2 GENERAL SAFETY GUIDELINES

Comprehensive safety instructions for boiler operation, installation, and handling.

III - TECHNICAL SPECIFICATIONS

1 KEY TECHNICAL CHARACTERISTICS

Detailed specifications including output, efficiency, and dimensions.

IV - OPERATION

2 COMMON OPERATIONAL FUNCTIONS

Describes common functions like anti-freeze, anti-legionella, and safety tests.

V - INSTALLATION

1 GENERAL INSTALLATION REQUIREMENTS

Compliance with regulations and general installation guidelines.

5 COMBUSTION PRODUCT FLUEING

Comprehensive guide to flue system installation, types, and accessories.

6 HYDRAULIC CONNECTIONS

Procedures and recommendations for connecting the boiler's hydraulic system.

7 GAS SUPPLY AND CONNECTION

Safety and procedural guidelines for connecting the gas supply.

8 ELECTRICAL WIRING AND CONNECTIONS

Details on mains connection, sensor wiring, and diagrams.

VI - PARAMETERS

1 BOILER PARAMETER LIST

Lists adjustable and read-only parameters for boiler configuration and diagnostics.

2 ACCESSING SETTINGS VIA QAA 73 SENSOR

Guide to navigating and modifying settings using the QAA 73 room sensor.

VII - COMMISSIONING

1 INSTALLATION PROTECTION AND WATER TREATMENT

Requirements for system protection using water treatment products like Bionibal.

6 PRE-COMMISSIONING VERIFICATIONS

A checklist of essential checks before boiler startup.

8 COMMISSIONING PROCEDURE

Detailed steps for initial boiler startup and functional checks.

VIII - GAS CONVERSION

1 GAS TYPE CHANGE PROCEDURE

Steps for converting the boiler to operate on different gas types.

2 GAS/CO2/CO/NOx FLOW & PRESSURE CONTROL

Procedures for adjusting gas flow, CO2, CO, and NOx levels.

X - OPERATING FAULTS

1 BOILER FAULT CODE LIST

Comprehensive list of boiler error codes and their respective diagnostic solutions.

Related product manuals