Need help?Do you have a question about the geminox THI 10-50 C and is the answer not in the manual?
General| Category | Boiler |
|---|---|
| Max working pressure | 3 bar |
| Gas connection | G 3/4" |
| Type | Condensing |
| Fuel Type | Natural Gas or Propane |
| Efficiency | Up to 109% |
Details on protecting the heating system installation from corrosion and bacteria.
Procedures for rinsing and filling the heating system with water, including bleeding.
Instructions for connecting and verifying the gas supply, including bleeding and leak checks.
Specifies the flow rate for the SEP version of the boiler, set at 16 l/min.
Adjusting the boiler's maximum heating power by modifying the PHz parameter for optimal performance.
Essential pre-commissioning checks for installation compliance, safety, and proper connections.
Inform user about unit operation, safety systems, and need for regular servicing by a qualified person.
Step-by-step guide for starting up the boiler, including LMU recognition and error handling.
Procedure for checking and adjusting the flame setting by disconnecting the ionizing electrode.
Verifying combustion products and flue gas parameters, especially after gas type changes.
Instructions for reattaching the boiler's front panel and securing it with screws.
Steps for converting the THI 10-50 C model to different gas types, requiring a qualified person.
Procedures for controlling gas flow and combustion parameters using specific adjustment screws.
Guide for cleaning and servicing the fan and burner components, including disassembly and reassembly.
Instructions for cleaning the boiler's heat exchanger after burner disassembly.
Verifying the proper operation of safety and control accessories like safety valves and control boxes.
How to check and adjust the expansion vessel's pre-inflation pressure for optimal efficiency.
Inspecting combustion product conduits for leaks and obstructions annually.
Steps for safely draining the heating installation and boiler, including opening air bleeds.
Table of resistance values for various sensors (heating, return, flue gas, outside) at different temperatures.
Information on the pressure sensor, including its output voltage relative to input pressure.
A comprehensive list of error codes displayed by the boiler and their corresponding solutions.
Details on maintenance alarms, their causes (hours, startups, months), and how to manage them.
Installation of a multifunctional digital room sensor for heating circuits and domestic hot water control.
Connecting the LMU control unit to other devices via LPB communication for system integration.
Enabling communication for a secondary heating circuit between the boiler's LMU and accessories.
Kit for enabling a second heating circuit on the THI 10-35 SEP model, ensuring LMU communication.
Kit for enabling a second heating circuit on the THI 10-50 C model, including pump and mixer control.
Controlling a second heating pump in parallel, managing heating outlet, and connecting safety solenoids.
Controlling hot water circulation pumps and connecting external safety gas solenoids.
Control unit designed for managing an additional heating circuit, required from three circuits upwards.
Control unit for managing two cascading boilers, with options for multiple boiler management.
Kit intended for Type C THI boilers to control domestic hot water production using solar panels.
Allows the connection of the domestic hot water sensor to the boiler's control unit.
Connects a central heating only boiler to a domestic hot water heater.
Fits to the boiler's control panel to control installations with only one heating circuit.
Information on BS type domestic hot water production systems for heating-only boilers.
Information on BIONIBAL corrosion inhibitor and BIONIBAGEL antifreeze/corrosion inhibitor products.
Description of the condensate lift pump used for boilers installed in a basement.
To Next Page