geminox THI 10-50 C User Manual

- 21 -
V - OPTIONS
1 - SET-UP TAKING ROOM TEMPERATURE INTO ACCOUNT (REG 73)
The REG 73 is a multifunctional digital room sensor
for one or two heating circuits and for the control of
domestic hot water.
Refer to the kit installation instructions.
2 - CLIP-IN LPB KIT (REG 130)
The LPB communication clip-in kit is used to
connect the LMU control unit to different units or
accessories of the type:
- RVA 46: zone regulator
- RVA 47: cascade regulator
- + others (distance management etc.)
Refer to kit installation instructions.
3 - SECONDARY CIRCUIT CLIP-IN KIT
The secondary circuit clip-in kit is used when a
second heating circuit is connected to the boiler. It
allows the communication between the boiler’s LMU
control unit and the various accessories of the
secondary circuit.
Refer to kit installation instructions.
PDG-REG 73
Fig. 12
THI-28-0
Fig. 13
T
H
I
-
3
1
-
0
Fig. 14

geminox THI 10-50 C Specifications

General

Brand	geminox
Model	THI 10-50 C
Category	Boiler
Language	English