Why does the fuse blow always on my Gemmy PLC-012 Laboratory Equipment?
If the fuse keeps blowing, you should check and fix the SCR or replace it with a new one. Alternatively, consider replacing the motor, ensuring proper operation, or using a power stabilizer.
What to do if my Gemmy PLC-012 is imbalanced?
To resolve imbalance issues, place the tube diagonally, ensure the rotor and rubber supports are screwed tightly and properly, and correctly position the motor.
How to fix vibration in Gemmy PLC-012 Laboratory Equipment?
To address vibration problems, try adjusting the rotor or tightening any loose components.
How to fix broken test tubes in Gemmy PLC-012?
To prevent test tubes from breaking, ensure they are placed properly and all the way down. Also, make sure to cover the rotor lid correctly. If a tube is already broken, replace it with a new one.
How to fix noise in Gemmy Laboratory Equipment?
To reduce noise, try positioning the motor correctly or replacing any worn components with new ones.
Why is my Gemmy PLC-012 Laboratory Equipment running at erratic speed?
If your equipment's speed is erratic, consider replacing the VR or other components.
Centrifuge classified as Class I equipment, compliant with safety and EMC standards.
Overview of the Class 1 tabletop centrifuge and model variations.
Important warning regarding biohazard use and personal protection.
Specific warning for PLC-024 model concerning weight and injury risk.
Advises against using equipment in ways not specified by manufacturer.
Outlines laboratory applications for which the centrifuge is designed.
For volumes up to 2.2ml micro-tubes of DNA precipitations.
For 24 capillary tubes used in HCT testing.
Accommodates various rotor sizes and types for different tests.
Explains g Force and RCF (Relative Centrifugal Force) calculation.
Details Swing-out, Fixed-Angle rotors, and Round/Conical bottom tubes.
Instructions for setting timer, speed, and starting the centrifuge.
How to use the brake and the function of the safety lid locking device.
Steps to recalibrate the speed indicator using a tachometer.
Warnings and recommendations for safe and accurate speed calibration.
Step-by-step guide for taking apart the centrifuge.
Strict warnings and prohibition of disassembly by unqualified personnel.
Procedures like checking rubber supports, motor lubrication, and fuse inspection.
Notes on carbon brushes, micro-switch, fuse, and F-2415 rotor gasket replacement.
Table listing common issues like power, speed, vibration, noise, and their corrective actions.
Reminders on lubrication, supervision for disassembly, and contacting distributors.
Guidelines for cleaning the centrifuge after use, including materials to avoid.
Precautions for handling and packing the centrifuge for transport.
Recommendations for storing the equipment to maintain its condition.
Details product warranty against defects in materials and workmanship.
Lists conditions not covered by the warranty, such as accident or misuse.
Defines Gemmy's liability and how to direct warranty claims.
General| Brand | Gemmy |
|---|---|
| Model | PLC-012 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
