Gemsy 7720 - 穿线的方法; Threading

1.在使用之前
Before Operating
1-7.穿线的 方法
Threading
把机上原有的线与缝纫用线绑结在一起。
针线
将针线拉到针眼附近，剪掉结头再次穿好针线。
若机上原来没有线，请参照穿线图正确进行穿线。
弯针线
将弯针线上的接头直接拉出弯针孔后，再剪断接
头。
Knot the preset thread and the thread being used
together to thread the machine.
Needle thread
Trim the knots off neatly before passing through the
eye of the needle to rethread.
Be sure to thread the machine correctly by referring to
the threading diagram.
Looper thread
Trim the knots off neatly after passing through the eye
of the looper.
4