Genasun GV-10 - User Manual

GV-10-Pb-12V: 12V Lead-Acid/AGM/Gel/Sealed/Flooded
GV-10-Pb-CV: 12V Custom Multi-Stage Lead-Acid/AGM/Gel/
Sealed/Flooded
GV-10-Li-12.5V: 11.1V (3s) Lithium Cobalt/Polymer
GV-10-Li-14.2V: 12V (4s) Lithium Iron Phosphate
GV-10-Li-16.7V: 14.8V (4s) Lithium Cobalt/Polymer
GV-10-Li-CV(**.*V): Custom CC/CV or Multi-Stage Lithium Variation
GV-10 Manual
For models:
Solar Charge Controllers with Maximum Power Point Tracking
IMPORTANT SAFETY INSTRUCTIONS | SAVE THESE INSTRUCTIONS
GENASUN GV-10 (ALL MODELS) MANUAL, REVISION 2.0 | 01.2018
10.5A / 140W
www.genasun.com
GENASUN
c/o BLUE SKY ENERGY
2598 FORTUNE WAY • SUITE K
VISTA, CA 92081 • USA
(see specs p.7 for the max. power of Li-ion versions.)

Summary

Safety Instructions

Inspection & Maintenance

Installation & System Connections

Selecting the Battery Type (Lead-Acid; PB Model Only)

Instructions for selecting the correct battery type for the GV-10 Lead-Acid models.

Mounting

Guidance on proper mounting locations and orientations for the GV-10 controller.

Connecting the Solar Panel and Battery

Connecting the Solar Panel

Procedure for connecting the solar panel to the GV-10 controller, including recommendations.

Connecting the Battery

Instructions for connecting the battery to the GV-10, with important safety cautions.

Status Indication

LED Run;Charge Indication

Explanation of LED patterns for standby, charging (low/high current), and battery charged states.

LED Error Indication

Details on LED error codes for overheat, overload, low/high battery voltage, and panel voltage issues.

Troubleshooting

Specifications

Specifications (cont.)

Certifications

Genasun GV-10 Specifications

General

Brand	Genasun
Model	GV-10
Category	Inverter
Language	English