Identifying your listening area
Divide your room into three equal-sized areas; front, centre and rear.
For music productions place your listening setup in the front area. The angle
between the left and right monitors should be 60° degrees. Each monitor should
be aimed towards the listening position. For lm production, place your listening
setup in the rear area.
60°
L
R
110°
60°
+10°
-10°
RS
C
Screen
R
LS
L
Room resonances between room surfaces are called standing waves or room
modes. In the case of resonances, sound pressure maxima occur on the surface.
Place the listening position at least one metre from the walls to avoid the zone of
the pressure maximum.
60°
L
R
›1 m
To Next Page
Loading...
