Need help?Do you have a question about the Genelec 8030C and is the answer not in the manual?
General| Amplifier Power | 50 W (LF) + 50 W (HF) |
|---|---|
| Type | Active Studio Monitor |
| Configuration | 2-way |
| Crossover Frequency | 3 kHz |
| Driver Size | 5 inch (LF), 3/4 inch (HF) |
| Maximum SPL | ≥104 dB |
| Inputs | 1 x XLR |
| Enclosure Type | Bass-reflex |
Guidance on placing the 8030C monitor in its listening position, aligning acoustic axes.
Instructions for connecting audio and power cables to the loudspeaker.
Explanation of the Intelligent Signal Sensing power saving feature.
How to match the loudspeaker's input sensitivity to the audio source.
Control (Switch 1) to attenuate bass frequencies around 160 Hz by 4 dB.
Control (Switch 2) to attenuate treble response above 4 kHz by 2 dB.
Control (Switch 3) to activate a -4 dB filter to lowest bass frequencies (55 Hz).
Ensuring acoustic axes are aimed towards the listening position for optimal performance.
Placing loudspeakers symmetrically and equidistant from the listening position.
Reducing unwanted sound image blurring from nearby reflective surfaces.
Ensuring adequate airflow and space for cooling and reflex port function.
To Next Page
