Genelec 8330 User Manual

5
Monitor setup guide
Identifying your listening area
Divide your room into three equal-sized areas; front, centre and rear.
For music productions place your listening setup in the front area. The angle
between the left and right monitors should be 60° degrees. Each monitor should
be aimed towards the listening position. For lm production, place your listening
setup in the rear area.
60°
L
R
110°
60°
+10°
-10°
RS
C
Screen
R
LS
L
Room resonances between room surfaces are called standing waves or room
modes. In the case of resonances, sound pressure maxima occur on the surface.
Place the listening position at least one metre from the walls to avoid the zone of
the pressure maximum.
60°
L
R
›1 m

Genelec 8330 Specifications

General

Frequency Response	45 Hz - 23 kHz (-6 dB)
Type	Active Studio Monitor
Configuration	2-Way
Crossover Frequency	3 kHz
Amplifier Power	50 W (LF), 50 W (HF)
Driver Dimensions	5 inch (woofer), 0.75 inch (tweeter)
Maximum SPL	104 dB
Weight	5.5 kg
Input Connectors	1 x XLR Analog
Enclosure Type	Reflex