Need help?Do you have a question about the Genelec 8331A and is the answer not in the manual?
Details the included accessories and the 8331A's suitability for high precision monitoring.
Explains the GLM software and the necessary hardware kit for setup and operation.
Describes the coaxial driver technology that minimizes acoustic diffraction for a flat response.
Explains the waveguide design providing directivity control across all audio frequencies.
Details the acoustically coaxial woofer placement creating a point source radiator.
Highlights SAM technology for automatic room acoustic compensation and accurate imaging.
Covers analog and AES/EBU digital inputs, sensitivity, and automatic selection.
Discusses universal mains voltage support and the Intelligent Signal Sensing (ISS) feature.
Outlines the process of setting up monitors using GLM software and the control network.
Explains how to adjust the 8331A for room placement using DIP switches when GLM is not used.
Describes bass roll-off, bass tilt, and treble tilt controls for frequency response adjustment.
Explains the desktop low frequency control for compensating bass boost from surfaces.
Explains how to turn off the front panel LED indicator light.
Describes the ISS automatic power saving function and its configuration.
Explains the meaning of the front panel indicator light colors and patterns.
Recommends Genelec subwoofers for deeper bass and multichannel setups.
States that there are no user-serviceable parts and recommends certified personnel.
Lists essential safety warnings and precautions for safe operation and to prevent hazards.
Details the two-year warranty against manufacturing faults.
Explains FCC compliance for Class B digital devices and potential interference.
Lists the specifications for the drivers, weight, and dimensions.
Specifies the short-term output power for the bass, midrange, and treble amplifiers.
States amplifier THD and details power consumption in various states.
Indicates the supported mains voltage range and power ratings.
Details analog/digital input connectors, sensitivity, and word length.
Describes the control network type, connection, and crossover points.
Mentions GLM software adjustments for frequency response and system calibration.
To Next Page
General
