Generac Power Systems 1042-1 User Manual

4
High Pressure Washer
KNOW YOUR PRESSURE WASHER
Read this owners manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
Generac 2250PSI High Pressure Washer
GENERAC
Pump  Develops high pressure.
Recoil Starter  Used for starting the engine man-
ually.
Spray Gun  Controls the application of water onto
cleaning surface with trigger device. Includes safety
latch.
Adjustable Nozzle Extension  You must attach
this to the spray gun to provide high pressure
stream. The adjustable nozzle allows you to adjust
the spray pattern which, in turn, adjusts the force of
spray.
Dual Element Air Filter  Filter element limits the
amount of dirt and dust that gets in the engine.
Water Inlet  Connection for garden hose.
High Pressure Outlet  Connection for high pres-
sure hose.
High Pressure Hose  Connect one end to water
pump and the other end to spray gun.
Goggles  Always use the enclosed goggles or
other eye protection when running your pressure
washer.
Automatic Cool Down System  Cycles water
through pump when water reaches 140°-145°F.
Warm water will discharge from pump onto
ground. This system prevents internal pump
damage.
Pressure Control Knob  Varies the pressure of
the high pressure spray.
Oil Fill Cap  Fill engine with oil here.
Gas Tank  Fill tank with regular unleaded
gasoline.
Spray Gun
Adjustable Nozzle
Extension
High Pressure Hose
Recoil Starter
Goggles
Gas Tank
Water Inlet
Pressure Control Knob
Pump equipped with
Automatic Cool Down System
High Pressure Outlet
Dual Element Air Filter
Oil Fill Cap

Generac Power Systems 1042-1 Specifications

General

Brand	Generac Power Systems
Model	1042-1
Category	Pressure Washer
Language	English