Generac Power Systems 5240 User Manual

65
ITEM PART NO. QTY. DESCRIPTION
1 0D5694 1 CASTING, TWIN REGULATOR HOUSING (7KW)
0F9285 1 CASTING, TWIN REGULATOR HOUSING
2 0F5022 1 SOLENOID COIL, 12VDC
3 0C4647 1 GASKET , SOLENOID
4 0D4166 1 PLUNGER, LP REGULATOR ASSEMBLY
5 0F8822 1 REGULATOR BRACKET
6 022145 2 WASHER FLAT 5/16-M8
7 022129 2 WASHER LOCK 5/16-M8
8 0F4795 4 SCREW PPHM SEMS M4-0.7 X 10
9 0C5760P 1 FUEL JET GASEOUS REGULATOR (7KW)
10 0C6606 1 BARBED STRAIGHT ½ NPT x ½ (7KW)
0C6606 2 BARBED STRAIGHT ½ NPT x ½
11 097934 1 O-RING (7KW)
12 0C4645 1 ADJUSTER SCREW, TWIN REGULATOR (7KW)
13 0C5761 2 LEVER, REGULATOR
14 0C5968 2 SUPPORT, INLET SEAL
15 0C6066 2 SEAL, INLET
16 0C5759 2 PIN, PIVOT ARM
17 0C5764A 2 SPRING, REGULATOR (7KW)
0C5764 2 SPRING, REGULATOR
18 070728 4 SCREW, PFHMS M3-0.5 x 5
19 0C6069 2 GASKET, DIAPHRAGM
20 0C5762 2 COVER, TWIN REGULATOR (7KW)
0F9189 2 COVER, TWIN REGULATOR
21 045764 16 SCREW, TAPTITE M4X8 BP
22 0C6731 2 RIVET, POP .118 X .125
23 0C6067 2 SUPPORT, DIAPHRAGM
24 0C4706 2 DIAPHRAGM, TWIN REGULATOR
25 0C6068 2 CAP, DIAPHRAGM SUPPORT
26 0C4643A 2 INLET, TWIN REGULATOR 11.11 DIA.
27 072683A 2 PLUG STD PIPE 1/8 SOCKET HEAD (7KW)
072683A 1 PLUG STD PIPE 1/8 SOCKET HEAD
28 0A4032 1 PIN, LIMITED ADJUSTMENT (7KW)
29 0D3308 4 WASHER, FLAT M3 X 10mm O.D.
30 024310 1 PLUG, STANDARD PIPE 1/2” STEEL SQUARE HEAD (7KW)
31 0D3973 1 PLUG, EXPANSION 16mm (7KW)
32 042907 2 SCREW HHC M8-1.25 X 16
33 028414A 1 BARBED STRAIGHT 1/8”NPT X ¼” (10KW)
34 035578A 1 NIPPLE CLOSE 1/8NPT (10KW)
35 0G0247 1 SOLENOID, LP/NG DC12V (10KW)
36 0F9773B 1 SOLENOID WIRE, #0 (10KW)
37 0F9773A 1 SOLENOID WIRE, #14 (10KW)
Section 9 — Exploded Views and Parts Lists
Air-cooled Generators
7 & 10kW, GN-410/GT-530 Regulator – Drawing No. 0F9425

Generac Power Systems 5240 Specifications

General

Brand	Generac Power Systems
Model	5240
Category	Inverter
Language	English