P
padillasarahJul 31, 2025
Why does my Generac Power Systems Portable Generator bog down under load?
- CcaitlinwongJul 31, 2025
If your Generac Power Systems Portable Generator engine runs well without any load but slows down significantly when you connect devices, it could be due to a few reasons. First, there might be a short circuit in one of the connected devices, so try disconnecting them to see if that helps. Second, you might be overloading the generator by connecting too many devices at once; check the generator's capacity. Lastly, there could be a short circuit within the generator itself, in which case you should contact a Generac service facility.