Generac Power Systems H-100 User Manual

29
Move the cursor to the “Time Start” time of day min-
utes field on the second line.
Press the “ENTER” button to enter edit mode.
Use the up and down arrow key until the desired
minute of the hour is displayed.
Press the “ENTER” button to exit edit mode.
Move the cursor to the on the bottom line.
Press the “ENTER” button to move to the second
page.
Move the cursor to the “QuietTest Selected” field on
the first line.
Press the “ENTER” button to enter edit mode.
Use the up and down arrow key until a “Y” appears.
Press the “ENTER” button to exit edit mode.
NOTE:
Verify that “Xfer On Exercise” field is an “N”.
Otherwise, QuietTest® will be overridden with
normal exercise.
General Information
H-100 Control Panel Technical Manual

Generac Power Systems H-100 Specifications

General

Brand	Generac Power Systems
Model	H-100
Category	Control Panel
Language	English