Generac Power Systems H-100 User Manual

Press the  button.
Press the “ENTER” button.
Press the  button.
Press the “ENTER” button.
This is the HTS enabling/disabling page. The HTS
number needs to be selected first.
Press the  button to go to the HTS # field.
Press the “ENTER” button to enter the edit mode.
Select the appropriate HTS number using the up and
down arrow buttons.
Press the “ENTER” button to exit the edit mode.
Press the  button to go to the HTS Enable/Disable
field.
Press the “ENTER” button to enter the edit mode.
Select the Enabled / Disabled using the up and down
arrow buttons.
Press the “ENTER” button to exit the edit mode.
36
General Information
H-100 Control Panel Technical Manual

Generac Power Systems H-100 Specifications

General

Brand	Generac Power Systems
Model	H-100
Category	Control Panel
Language	English