Generac Power Systems MAGNUM MMG45IF4 User Manual

General Information
36949 B MMG25I-35D-45I-55DF4 Operating Manual 21
Figure 2-17. Schedule Tab Screen
Status Tab
The Status tab contains the status and configuration of the controller, firmware and data connections.
Figure 2-18. Status Tab Screen
Generator Monitoring
Generator information is displayed on both the Generator operator screen and Generator tab within the maintenance
screens. For more information, see Operator Screens and Maintenance Screens.
Engine Monitoring
Engine information is displayed on both the Engine operator screen and Engine tab within the maintenance screens.
For more information, see Operator Screens and Maintenance Screens.
Controller Information Displays, Functions and Reset
The Power Zone™ controller constantly monitors vital generator and engine functions for a number of operation,
alarm and fault conditions. When a fault condition occurs, the engine will shut down automatically and the main
display will show the fault that has caused the shutdown. To resume operation, the fault condition must be resolved.
To reset the controller and resume operation, press the Enter () button.
00407
GEN
V
+
-
SITE GENSET 7741 \ 7740
07:10
480V/277V 3-Phase
Return Delay 10:00:00
0.0 Hz
Total Generator
kWh+
kVAh
kVArh
kW
kVA
kVAr
pf
0.0
0.0
0.0
0.0
0.0
0.0
0.00
0.0
%
%
0.0
kW
kVAr
StatusSchedule I/O AlarmsEngine Generator
1/1
Warning
Warning
Warning
ActionDescriptionAlarm Hours Date Time
Maintenance
Scheduler Enabled to run Reserved Reserved
Event Week Day Start Stop Duration Event Week Day Start Stop Duration
250 hr Maint. - Refer to Manual
500 hr Maint. - Refer to Manual
3000 hr Maint. - Refer to Manual
1 250:00
2 500:00
3 3000:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
9
10
11
12
13
14
15
16
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
All Monday 00:00 00:00 0:00
1
2
3
4
5
6
7
8
00408
GEN
V
+
-
SITE GENSET 7741 \ 7740
07:10
480V/277V 3-Phase
Return Delay 10:00:00
0.0 Hz
Total Generator
kWh+
kVAh
kVArh
kW
kVA
kVAr
pf
0.0
0.0
0.0
0.0
0.0
0.0
0.00
0.0
%
%
0.0
kW
kVAr
StatusScheduleI/OAlarmsEngine Generator
1/1
- DCD
- DSR
- DTR
- RTS
- CTS
Model
Link Quality
100%
Application
USB ID
Supervisor State:
Engine State:
Load State:
Protections:
Logging
Log Dest:
Log Mode:
USB drive:
Host IP:
Host Port:
Slave IP:
Slave Port:
Tot a l mem
Log mem free
Log Time:
Bootloader
Analogue
Engine:
Model
Application
USB ID
Bootloader
Ethernet

Generac Power Systems MAGNUM MMG45IF4 Specifications

General

Brand	Generac Power Systems
Model	MAGNUM MMG45IF4
Category	Portable Generator
Language	English