Generac Power Systems OHVI GSH 220 - Section 14: Specifications - Small Frame Engines; Torque Specifications (Small Frame)

14-5
SECTION 14: SPECIFICATIONS - SMALL FRAME ENGINES
14
TORQUE SPECIFICATIONS
MODEL GN-190 GN-191 GN/GSH-220
ROCKER COVER SCREWS
5.4 Nm
(48 in-lbs)
5.4 Nm
(48 in-lbs)
5.4 Nm
(48 in-lbs)
ROCKER ARM JAM NUT
8.1 Nm
(72 in-lbs)
8.1 Nm
(72 in-lbs)
8.1 Nm
(72 in-lbs)
CYLINDER HEAD BOLTS
29.8 Nm
(22 ft-lbs)
29.8 Nm
(22 ft-lbs)
29.8 Nm
(22 ft-lbs)
CONNECTING ROD BOLTS
13.6 Nm
(120 in-lbs)
13.6 Nm
(120 in-lbs)
13.6 Nm
(120 in-lbs)
FLYWHEEL NUT
111.1 Nm
(82 ft-lbs)
111.1 Nm
(82 ft-lbs)
111.1 Nm
(82 ft-lbs)
CRANKCASE COVER BOLTS
24.4 Nm
(216 in-lbs)
24.4 Nm
(216 in-lbs)
24.4 Nm
(216 in-lbs)
IGNITION COIL BOLTS
10.8 Nm
(96 in-lbs)
10.8 Nm
(96 in-lbs)
10.8 Nm
(96 in-lbs)
SPARK PLUG
20.3 Nm
(180 in-lbs)
20.3 Nm
(180 in-lbs)
20.3 Nm
(180 in-lbs)
REWIND STARTER SCREWS
10.8 Nm
(96 in-lbs)
10.8 Nm
(96 in-lbs)
10.8 Nm
(96 in-lbs)
STARTER MOTOR BOLTS
24.4 Nm
(216 in-lbs)
24.4 Nm
(216 in-lbs)
24.4 Nm
(216 in-lbs)
INTAKE MANIFOLD SCREWS
10.8 Nm
(96 in-lbs)
10.8 Nm
(96 in-lbs)
10.8 Nm
(96 in-lbs)
CARBURETOR TO INTAKE
MANIFOLD
4.5 Nm
(40 in-lbs)
4.5 Nm
(40 in-lbs)
4.5 Nm
(40 in-lbs)
AIR CLEANER BOX (TO CARBU
-
RETOR)
5.6 Nm
(50 in-lbs)
5.6 Nm
(50 in-lbs)
5.6 Nm
(50 in-lbs)
GOVERNOR LEVER CLAMP
BOLT
12.2 Nm
(108 in-lbs)
12.2 Nm
(108 in-lbs)
12.2 Nm
(108 in-lbs)
OIL FILTER ADAPTER BOLTS
12.2 Nm
(108 in-lbs)
12.2 Nm
(108 in-lbs)
12.2 Nm
(108 in-lbs)
LOW OIL SWITCH
12.2 Nm
(108 in-lbs)
12.2 Nm
(108 in-lbs)
12.2 Nm
(108 in-lbs)
BLOWER HOUSING SCREWS
4.5 Nm
(40 in-lbs)
4.5 Nm
(40 in-lbs)
4.5 Nm
(40 in-lbs)
0C1103Arev0.indd 5 6/22/2006 10:51:56 AM