EasyManuals Logo

Generac Power Systems PowerBOSS 8000 PowerMaster User Manual

Generac Power Systems PowerBOSS 8000 PowerMaster
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
WARNING
;ENERATOR
Disconnect the spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
, WARNING
DO NOT touch hot surfaces.
Allow equipment to cool before touching.
CAUTION
DO NOT tamper with governed speed.Generator supplies
correct rated frequency and voltage when running at governed
speed.
DO NOT modify generator in any way.
CAUTION
See"Don't Overload Generator" on page I I.
Start generator and let engine stabilize before connecting
electrical loads.
Connect electrical loads in OFF position, then turn ON for
operation.
Turn electrical loads OFF and disconnect from generator
before stopping generator.
CAUTION
Use generator only for intended uses.
tf you have questions about intended use,ask dealer or call
1-800-270-1408.
Operate generator only on level surfaces.
DO NOT expose generator to excessive moisture, dust, dirt,
or corrosive vapors.
DO NOT insert any objects through cooling slots.
tf connected devices overheat, turn them off and disconnect
them from generatoc
Shut off generator if.'
-electrical output is lost;
-equipment sparks,smokes, or emits flames;
-unit vibrates excessively.
/
4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems PowerBOSS 8000 PowerMaster and is the answer not in the manual?

Generac Power Systems PowerBOSS 8000 PowerMaster Specifications

General IconGeneral
BrandGenerac Power Systems
ModelPowerBOSS 8000 PowerMaster
CategoryPortable Generator
LanguageEnglish

Related product manuals