WELDMENT RADIATOR SUPPORT C4
2 0F2608A 1 RADIATOR 598 X 568 X 49 CPL LH
3 0F5263 1 V-BELT 31/64" X 57-3/8"
4 046526 5 WASHER LOCK M10
5 059981 4 SCREW HHC M10-1.5 X 30 G10.9
6 0C8165 2 NUT HEX LOCK 5/16-24 NY INS
7 0F5050A 1 SHIELD RADIATOR C4
8 0C8566 16 SCREW HHFC M6-1.0 X 20 G8.8
9 0F2573 1 PULLEY FAN V-GROOVE 9"
10 0F4011 1 FAN COOL 22" DIA 10 BLADE LH
11 0G56820ST03 1 FLAT TENSIONER ARM
12 0G2990 1 SHOULDER BOLT 3/8 X 1/2"
13 0F2862 1 SPRING TENSION CPL
15 022131 4 WASHER FLAT 3/8-M10 ZINC
16 0E2507 1 PROBE COOLANT LEVEL 3/8 NPTF
17 029032 1 HOSE 9/32 ID (27”LG)
18 0F2561 1 HUB FLEX PLATE
19 0C8145 8 WASHER FLEX (THIN)
20 051769 1 WASHER LOCK M12
21 0C7043 12 DISK FLEX
22 0G1039B 1 COUPLING FLEX HUB MACHINED G3
23 022473 8 WASHER FLAT 1/4-M6 ZINC
24 0C8146 4 SCREW HHC 5/16-24 X 1.124
25 022097 16 WASHER LOCK M6-1/4
26 076749 1 TANK COOLANT RECOVERY
(1) 27 048031C 2(REF) CLAMP HOSE BAND 1/4
28 031971 1 BEARING #6205 2NSE C3 E SRI2 S
29 0F4032 1 PULLEY 5.5" DIA MACHINED
30 042911 1 SCREW HHC M10-1.5 X 30 G8.8
31 0F2872 1 SCREW HHC 1/2-13 X 2" G8
32 022304 2 WASHER FLAT 1/2 ZINC
33 022195 1 WASHER LOCK 1/2
34 022196 1 NUT HEX 1/2-13 STEEL
35 0F8651 9 SCREW HHFC M8-1.25 X 20 W/M6
36 070015 1 NUT HEX LOCK 5/16-18 NY INS SS
37 0F4026B 1 SHAFT FAN DRIVE C4 3.0L G14
38 0F2461 1 RETAINER BEARING
39 022145 8 WASHER FLAT 5/16-M8 ZINC
40 022129 10 WASHER LOCK M8-5/16
41 039414 1 SCREW HHC M8-1.25 X 35 G8.8
42 082774 1 KEY WOODRUFF 4 X 19D
43 0F9219A 1 HOSE, RADIATOR UPPER FRONT
44 0F6726A 1 HOSE, RADIATOR LOWER FRONT
45 049813 8 NUT HEX M6 X 1.0 G8 YEL CHR
46 0F2835 1 INNER DISCHARGE DUCT, C4
47 090283 1 CAP RADIATOR 13 PSI
48 0C2454 6 SCREW THF M6-1 X 16 N WA Z/JS
49 099502 2 CLAMP HOSE #24 B1.06-2.00
50 039253 2 SCREW HHC M8-1.25 X 20 C8.8
51 080713 1 BRACKET COOLANT TANK
52 0F3072 8 INSULATION RETAINMENT HANGER
53 0G67930ST03 1 BRACKET TENSIONER SPRING
54 0F3760B 1 INSULATION FRONT INNER DUCT
55 078115 8 WASHER SELF LOCKING DOME
56 0F3890 4 RETAINER INSULATION (450)
57 0F4051D 2 INSULATION INNER DUCT
58 035685 2 CLAMP HOSE #28 1.32-2.25
59 052250 2 TAPE FOAM 1 X 1 (26.75” LG)
60 0G4376 1 WASHER BELLEVILLE .75X.38X.028
61 052644 1 SPACER .5 X 1.5 X .25 STL/ZINC
62 0G56830ST03 1 TENSIONER ARM SUPPORT BENT 90
63 0G5557 1 SCREW HHC M12-1.5 X 75 C8.8
64 051698 1 SCREW HHC M8-1.25 X 75 C8.8
65 049820 3 NUT HEX LOCK M8-1.25 NY INS
(1) INCLUDED WITH I/N 26.
BEARING PRESS NOTE:
APPLY LOCTITE 620 BEARING RETAINMENT
COMPOUND TO BEARING SURFACE ON ITEM 37
PRIOR TO PRESSING ITEM 28 ONTO ITEM 37.
ALSO APPLY LOCTITE 620 BEARING RETAINMENT
COMPOUND TO THE OUTSIDE OF 28 PRIOR TO
INSTALLING ITEM 28 INTO ITEM 38.
THREAD LOCKING NOTE:
APPLY MEDIUM STRENGTH BLUE THREAD LOCKING FLUID TO:
• I/N 5 PRIOR TO THREADING INTO FAN DRIVE HUB
• I/N 30 PRIOR TO THREADING INTO SHAFT FAN
DRIVE I/N 37.
• I/N 41 PRIOR TO THREADING INTO I/N 18.
To Next Page
Loading...
