General International TS4001 User Manual

TS4001 man v.141027
Model #
SETUP & OPERATION MANUAL
FEATURES
● Powerful 13 amp motor
● Cast aluminum work table
● Riving knife
● Anti-kickback pawls
● Includes:
● 10 in. 24 tooth tungsten
carbide tipped saw blade
● Rip fence
● Miter gauge
● Push stick
● Metal stand
SPECIFICATIONS
● 120 V ~ 60 Hz 13 A
● 5700 rpm
● Max. cutting height at 90°:
2-7/8 in. (73 mm)
● Max. cutting height at 45°:
2-5/8 in.(65 mm)
● Tilting range: 0° to 45° left
● Table dimensions: 26 in. x 17-
3/8 in. (660 mm x 440 mm)
● Table height (on stand):
35-3/8 in. (900 mm)
● ETL certication
● Net weight: 44 lb. (20 kg)
TS4001
10 inch Table Saw

General International TS4001 Specifications

General

Brand	General International
Model	TS4001
Category	Saw
Language	English

Summary

Assembly and Setup

Remove All Parts

Instructions for unpacking the table saw and its accessories from the carton.

Functional Description

Identifies and describes the various parts and components of the table saw.

Stand Assembly and Table Mounting

Stand Assembly

Steps for assembling the saw stand, including crossbars and locating holes.

Mounting the Table Saw

Procedure for attaching the table saw to the assembled stand.

Saw Assembly and Component Installation

Saw Assembly

General steps for assembling the saw components and checking connections.

Mounting the Blade

Instructions for installing the saw blade correctly and securely.

Fitting the Safety Guard

Procedure for attaching the blade's safety guard to the saw.

Mounting the Rip Fence

Steps for attaching and adjusting the rip fence for cutting.

Operating Procedures

Power Source Connection

Details power requirements, grounding, and connecting to the power supply.

Using Your Saw

Instructions for operating the table saw after setup and connection.

Start Up and Cutting Operations

Start Up

Steps for unlocking the saw, checking connections, and powering on.

Miter Cutting / Cross Cutting

Procedure for performing angled cuts across the grain using the miter gauge.

Bevel Cutting

Instructions for adjusting the blade angle for bevel cuts.

Rip Cutting

Procedure for cutting with the grain using the rip fence.

Maintenance

Preventive Maintenance

Guidelines for regular tool maintenance to ensure good condition and safety.