To Next PageTo Next Page
Need help?Do you have a question about the General ARHG45LMLA and is the answer not in the manual?
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Heating Capacity | 13000 BTU/h |
| Indoor Unit Noise Level | 38 dB(A) |
| Outdoor Unit Dimensions (H x W x D) | 550mm x 780mm x 285mm |
| Outdoor Unit Weight | 32 kg |
| Operating Temperature (Cooling) | 18°C to 43°C |
Detailed electrical parameters for indoor and outdoor units.
Sound pressure levels for indoor and outdoor units.
Type of compressor and refrigerant details.
Specifications for indoor and outdoor unit fan motors.
Detailed physical dimensions and measurements for the indoor unit.
Detailed physical dimensions and measurements for the outdoor unit.
Schematic illustrating refrigerant flow and components in the outdoor unit.
Schematic illustrating refrigerant flow and components in the indoor unit.
Wiring diagram for the outdoor unit's electrical components.
Wiring diagram for the indoor unit's electrical components.
Circuit details for the indoor unit's control unit and PCBs.
Circuit diagram for the indoor unit's power supply PCB.
Detailed schematic of the indoor unit's main control board.
Detailed schematic of the indoor unit's power supply board.
Circuit diagrams for the outdoor unit's Inverter and Main PCBs.
Circuit diagrams for Filter, Active Filter, Transistor, and Capacitor PCBs.
Detailed layout and connections for the outdoor unit's main control board.
Detailed layout and connections for the outdoor unit's transistor PCB.
Explains error display methods and lists indoor unit error codes.
Lists error codes for wired remote control operation.
Lists error codes and their corresponding LED blink patterns for the outdoor unit.
Steps to prepare the unit before performing refrigerant collection.
Detailed procedure for collecting refrigerant using the pump down function.
Parts for the main housing and initial assembly.
Parts related to the fan, motor, and casings.
PCBs, terminals, and sensors for the control unit.
Parts for the outer casing, panels, and base assembly.
Parts like compressor, fans, valves, and accumulator.
Lists of PCBs, thermistors, and reactor assembly.
Fasteners, insulation, cable ties, and remote control for indoor unit installation.
Drain pipes, caps, and cable bushes for outdoor unit installation.
Optional remote controls, sensor units, and connection kits.
Optional long-life filter for improved air quality.
