General EP8709 User Manual

immediately begin reading out humidity and
ambient temperature measurements made
by the sensors at the top of the unit.
To display the dew point temperature
(instead of ambient temperature) on the lower
readout, press the
DEW button. The reading
will be accompanied by the symbol
DEW at
its left. To return to displaying ambient
temperature, press the
DEW button again.
To display the wet bulb temperature
(instead of ambient temperature) on the
lower readout, press the
WBT button. The
reading will be accompanied by the symbol
WBT at its left. To return to displaying
ambient temperature, press the
WBT button
again.
By default, the EP8709 displays ambient,
dew point and wet bulb temperatures in °F.
To switch to °C , press the F/C button.
To hold a pair of readings (RH + ambient/
dew point/wet bulb temperature), press the
HOLD button. The text HOLD will appear at
the right of the RH readout. To “unfreeze”
the display and resume showing real-time
readings, press the
HOLD button again. This
will cause
HOLD to disappear from the RH
readout.
Pressing any button turns on the green
backlight for 10 seconds.
To extend the life of the “9V” battery
powering the EP8709, the unit’s Auto Power
8

General EP8709 Specifications

General

Brand	General
Model	EP8709
Category	Measuring Instruments
Language	English