Why is the General GEM130 Mixer motor temperature rising with reduced output speed?
The motor temperature may rise with reduced output speed in your General Mixer due to several reasons: the voltage could be too low (check the power supply), the mixer might be overloaded (reduce the load), or the mixing speed is too high, or the wrong stirrer is being used (select a suitable speed and stirrer).
What to do if my General Mixer has oil leakage?
If your General Mixer is leaking oil, it's likely that the seal rings are worn out and need to be replaced.
Why is there abnormal noise and high temperature from the General GEM130 Mixer gearbox?
Abnormal noise and high temperature from the General Mixer gearbox is caused by insufficient lubrication. To resolve this, add or replace the grease.
What to do if the General Mixer knocks with the bowl?
If your General Mixer is knocking with the bowl, it's likely that the stirrer or bowl is deformed. You should repair or replace the stirrer or bowl.
How to fix a General GEM130 when the tool shaft does not rotate?
If the tool shaft of your General Mixer does not rotate after starting the machine, it could be due to loosened electric wiring. Check the electric wiring and tighten any loose connections.
Details the use of the hook stirrer for kneading dough, specifying suitable flour-to-water ratios and speed.
Explains the application of the beater stirrer for stuffing, recommending the appropriate speed setting.
Describes the function of the wire whip stirrer for liquid food mixtures, recommending the high speed setting.
Instructs on cleaning the bowl and agitator after use to maintain the machine's condition.
Explains gearbox lubrication, noting initial packing and how to add or replace grease.
To Next Page
General