GSE-109-110-112 SLICER
7
P/N GENSLICERMAN
RevA 10-2011
RECIEVING
GSE-112
SPECIFICATIONS
(CONTINUED)
MODEL
GSE-112
DIM A DIM B DIM C WEIGHT
20.0 in 22.0 in 18.0 in 55.1 lbs
508 mm 559 mm 457 mm 25 Kgs
Fig. 1: No Chevron OK! Fig. 2: Chevron Exposed FAILED!
DROP N TELL
SHIPPING DAMAGE
In the unfortunate event your new GENERAL product
arrived damaged, contact the carrier immediately (with-
in 24 hours) and file a freight damage claim with them.
General recomends taking supportive pictures and to
save all packing materials when filing a claim. We also
recomend ccontacting TLC Technical Service at 1-877-
368-2797.
Freight damage claims are the responsibility of the pur-
chaser and are not covered under General’s limited
warranty.
To help assure you receive your GENERAL prod-
uct in the best possible condition, General has
installed a “G-Shock” device many of our products.
Designed to indicate if there was any unusual
shock during transportation The Legacy
Companies wants to be assured your product
arrives safely without damage.
When
you first receive your new GENERAL prod-
uct and before opening the box, you should first
inspect the Drop N Tell “G-Shock” device located
on the outside of the box near the packing slip.
Review the adjacent pictures and determine which
picture identifies your device.
Figure 1 does not have an exposed blue chevron
indicating your mixer has not sustained unusual
shock while being delivered to you from your deal-
er or distributor and you may continue to the sec-
tion marked UNPACKING.
Figure 2 has an exposed blue chevron indicating
your mixer may have been subject to unusual
shock during transportation. Although Figure 2 is
not an indicator of actual damage, it does indicate
that there may have been an issue during the ship-
ping process. If your “G-Shock” device looks like this,
you should immediately notify your shipper, dealer or
distributor. You are also encouraged to notify Technical
Service at The Legacy Companies at 1-877-368-2797.
To Next Page
Loading...
Need help?
General
