To Next Page

To Previous Page

Applications for the HT08

include:

• Water damage remediation—Because the HT is

designed to be deployed and left in place over the

duration of the job, it is always in equilibrium with the

environment.

• Process control—The HT enables, simplifies and cuts

the cost of environmental monitoring of office buildings,

greenhouses, food and equipment storage facilities,

wineries, freezers, shipping containers,

HVAC/R

installations, computer rooms, labs, libraries, museums

and saunas.

• Electronics manufacturing—Alerts provided by the low-

humidity alarm function of the HT can mitigate the risk

of damaging high-voltage static discharges.

KEY FEATURES

• One button starts/stops data logging without a PC

• Plug-and-play USB 2.0 interface; no need for cables,

cradles or docks

• Large storage capacity: 16,300 pairs of RH and

temperature readings

• Two LEDs indicate device working status and

“memory full”

• Included software is used to set: Sampling time from

10 seconds to 12 hours; Hi/Lo alarm setpoints for

humidity and temperature; Temperatur

e unit (°F or °C)

• Software also calculates and plots GPP and dew point and

wet bulb temperatures and displays data logs as time-

based graphs synchronized to your PC’s clock

General HT08 User Manual

Questions and Answers: