CLEANING (continued)
4.
Clean the back of the knife with hot, soapy water and a clean cloth by wiping
outward from the center.
5.
Re-install the knife wiper, positioning it as close to the knife as possible (the
wiper should not touch the knife). Replace and tighten the thumbscrews
clockwise.
FOOD PUSHER REMOVAL
1. Slide platform to extreme forward position (toward you).
2.
Unscrew (counter-
clockwise) and remove knob at end of food pusher
shaft.
3. Slide food pusher up and off shaft.
REPOSITIONING PLATFORM
1.
Remove the platform lock knob by turning it counter-clockwise.
2.
Tilt the platform away from regulator plate (toward you).
5
1. Loosen lock knob (counter-clockwise).
2. Slide fence off of platform.
To Next Page
Loading...
