UNPACKING AND ASSEMBLY
UNPACKING
The slicer comes fully assembled and ready for use; however, inspect
the shipping carton and its contents for shipping damage. If you detect
shipping damage to any of the contents of the carton, notify your carrier.
Remove the packing materials and take out the loose components (oil
bottle, brush, etc.), before removing the slicer from the carton. If there
are any parts missing, notify us immediately by calling the number on
the slicer.
CAUTION: The slicer should be installed on a level counter
top strong enough to safely support its weight.
The slicer should be thoroughly cleaned and sanitized (See Page 4)
before using to ensure sanitary conditions.
CLEANING
Clean and sanitize the slicer before using the first time, after each
use, and before slicing different types of food products. Follow
company, local, and state health/sanitation codes.
WARNING: Set the regulator knob to "0" and unplug the
slicer before cleaning or handling.
Do NOT use caustic or abrasive cleaners.
Do NOT spray cleaning materials or water toward the power switch,
the regulator knob, or the openings of the machine.
DISASSEMBLY FOR CLEANING Knife
Wiper
1.
Remove the two thumbscrews by turning them
counter-clockwise.
2.
Remove the knife wiper.
3.
Wash the knife wiper in hot, soapy water.
4
To Next Page
Loading...
