Version: 2020-09-04
106
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Click + to start the configuration dialog.
Possible jobs and timing configuration is similar to UPS event configuration
This example will trigger a job in case of AUX Port 1 is set to high. (on)
Trigger AUX Ports to high/low (on/off):
The AUX ports can be triggered as a job:
As an example, open Event Powerfail at UPS event handling. Select job AUX. Choose the port number that should change a state in
case of a power fail occurs. Under Command, select the state the AUX port should be switched to.
To Next Page
Loading...
