Version: 2020-09-04
135
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
After processing sensor data, the BACS® WEBMANAGER provides an intuitive well-structured interface to present the measurements.
In companion to the data presentation and configurable notifications, additional alarm LED and alarm buzzer ensures that the UPS will
be save during operation. Finally, the BACS® WEBMANAGER has an intuitive user interface via web browser, which also contains a
clearly arranged configuration menu.
EQUALIZATION: How to maintain individual charging / discharging of accumulators
As a continuously running background process, the BACS® WEBMANAGER calculates a so-called "charging voltage point" - A value
each block should have at the instantaneous total voltage. If an accumulator deviates from this average charging voltage, the BACS
WEBMANAGER sends a command to the corresponding BACS module that manages the accumulator. The BACS Module will manage
to adjust the charging voltage to the calculated charging voltage point.
As mentioned, many different values are recorded and monitored - even the average activity and the number of charging and
discharging cycles. If an event occurs during the monitoring which can be classified as serious or dangerous, the BACS
WEBMANAGER can manage alarm notifications provided by direct network alarms as well as email, SMS, SNMP or RCCMD. If
available, even an optional Modem can be used for customizable SMS alarming. In case of being operated inside a Modbus system,
BACS Webmanager will also serve the MODBUS format via one of the serial interfaces and / or via MODBUS over IP
Additional Features
Thanks to optimized memory routines, the BACS WEBMANAGER is capable to record battery data for up to 3 years by using reliable
32MB internal flash memory. All stored data can be downloaded and archived:
Alarms from the batteries or other devices connected to the UPS are logged with a timestamp - in order to ensure data and time
allocation, the BACS® WEBMANAGER provides automatic time synchronization with free definable time servers as well as second
clock inside the BACS BUS CONVERTER.
Picture: typical setup of a BACS
To Next Page
Loading...
