Generex CS141 - Page 136

Version: 2020-09-04
136
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
CS141 and BACS
To upgrade the CS141 into a full BACS system, you need the BACS Bus Converter
In case of your project involves larger installations with more than 50 batteries, we recommend the BACS Splitting Box. The Splitting
Box allows to divide the installation into individual strings. A further application is the possibility to realize well-structured clear cabling of
the BACS modules.
These devices can be ordered separately, among others, vie the GENEREX web shop as well as comfortably worldwide via a certified
GENEREX partner.
What is the difference between the BACS Webmanager Budget and the CS141 in companion with a BACS Bus Converter?
First of all: both devices fulfill exactly the same functions.
The difference is that the combination of a CS141 BACS and a Bus Converter is modularly composed of two separate devices, while the
BACS Webmanager Budget consists of a complete device: While the single device has a more compact design, the modular solution
allows to separate the BACS BUS Converter: Take it along while the CS141 will continues in place its monitoring and managing works.
In both cases, it is possible to connect a computer in order to use the BACS tools.
BACS WEBMANAGER Kits
The BACS WEBMANAGER BUDGET is the central control unit for all
batteries connected to the BACS bus. The BACS WEBMANAGER KIT
contains a BACS WEBMANAGER, a BACS CONVERTER, all necessary
cables as well as power supply.
The BACS WEBMANAGER can be configured via a special BACS data
cable as well as via a network interface.
Each BACS WEBMANAGER system includes a full-featured SNMP / Web
UPS Manager on COM 1 and offers a variety of sensors for access
control, temperature and humidity as well as versatile environmental
sensors. Even customer-specific sensors can be used via the optional
SENSORMANAGER.
Upgrade your CS141 into a full-featured BACS Webmanager:
For this configuration step, navigate to the following menu:
General COM port settings
Under Devices, click on the menu Setup. This will allow to activate the BACS capability and is necessary for further configuration.
Without this setting, the BACS menu is not accessible.
Note:
An easy method to figure out if your CS141 model can be used as a BACS Webmanager:
As soon as your CS141 provides an AUX-Port, your CS141 will support a BACS BUS Converter in general. You just need to look at the
ports. If you cannot access the device physically, you can take a look at the General COM Port settings. If your CS141 model does not
provide an AUX port, COM3 is not available.