Generex CS141 - Page 137

Version: 2020-09-04
137
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
BACS can be operated a completely standalone system - independently of your previous UPS configuration. Even it is useful for BACS
to know the current UPS state, it is not required. If you just want to monitor the batteries in standalone mode, you can disable the UPS
functionality by setting COM 1 from UPS to none.
If you want to monitor the alarm behavior of the UPS and already manage your network, let COM 1 be on UPS - BACS will be operated
like an additional feature. These basic settings are mandatory to be set for both - slot card versions and the external versions of the
CS141.
Note:
The UPS with their connected batteries generally stay together!
You can not monitor a UPS and connect the BACS-monitored batteries to another UPS. The power source is not important for CS141
as long as the correct UPS is queried:
it is crucial that the charge / discharge detection is configured to UPS as well as the associated batteries.
Since the BACS Webmanager provides different possibilities to query a UPS it is possibly it is up to you to select the best power source
as well as to configure the correct target. You can not use one BACS Webmanager for different Batteriy sites.