Generex CS141 - Page 14

Version: 2020-09-04
14
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
The UPS ensure power to all clients and the CS141 manages the solution to inform and finally to shut down all clients before batteries
are depleted.
MODBUS:
Modbus is the standard protocol used in industrial applications for monitoring and building management.
All devices of the CS141 family therefore provide as standard a MODBUS over IP interface. In addition, CS141 with COM2 connector
provide MODBUS over RS232 (CS141L & SC) and Modbus over RS485 (CS141L, SCM).
SNMP:
All models of the CS141 family communicate using SNMP via the UPS standard MIB RFC 1628.
If a system does not include this standardized MIB, administrators can download the RFC1628 data file from www.generex.de to
compile the MIB at a later time.
Once you have compiled the MIB file into the appropriate MIB directories of your SNMP station, the CS141 can be used.
UPSTCP:
CS141 provides with UPSTCP a complete API interface to ensure optimal integration into existing networks.
Upon request, this interface specification can be supplied to manufacturers of software in order to enable their own integration.
Network integration of the CS141
All models of the CS141 family are configured exclusively through the specially designed web interface.
In order to facilitate the initial configuration or a quick on-site intervention, the CS141 family Web Manager is preset to the hard-coded IP
address 10.10.10.10:
:
In factory default setting, the sliding switch is in the center position and the CS141 is in configuration mode. Due to its more compact
design, the CS141 MINI brakes the standard and uses on-board dip switches instead of a sliding switch:
Both dip-switches set to off position activates the configuration mode.
In this mode, some functions such as IP address data are configurable, but available only as soon as CS141 is switched to regular
operating mode.