Version: 2020-09-04
188
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
NO <-> Common On trigger, the contact will be closed
NC <-> Common On trigger, the contact will be opened
The standard configuration for these contacts is NO <-> Common. For this example, Port 3 will be closed as soon as the according
event will occur.
Timing will allow to define when this job shall be executed. In this case, the job is executed once, at the precise moment when the
defined alarm behavior occurs. For more information, please refer to the chapter for advanced event handling at part 1 of this manual.
With save, the job will be written to the configuration file and executed as soon as the according event occurs. You do not need to
restart the CS141 / BACS Webmanager.
Checking the job configuration:
At the according event, click to unfold the job list configured to this event:
The new job should be added accordingly:
From here, you can edit, delete and test the job. Results can be seen at the GX_R_AUX monitor as well as event chains may be
triggered.
Note
For the complete description of event handling including all symbols, please refer to page 58 of this manual, chapter:
System event handling
To Next Page
Loading...
