Version: 2020-09-04
25
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Extended menu trees
Depending on the CS141 model and available additional modules, additional menus are available. Please note that not every model can
provide the following menus:
Sensor menus
Depending on the type of sensor, the following menus will be added automatically:
1. Standalone sensor on COM 2
After selecting sensor at COM 2 Sensor and as sensor type SM / T or the combination sensor SM / TH, following menus will appear
automatically:
➔ Sensor monitoring screen
➔ System Tab: Devices
➔ Sub menu: Sensors
➔ Configure measuring range, alarm marker, operating range
➔ Configure jobs to the alarm marker
2. SENSORMAN2 at COM 2
After selecting sensor at COM 2 Sensor and as sensor type SENSORMAN2, following menus will appear automatically:
With the sensor matrix, an additional function is available that allows to combine single sensor events to collective events.
To Next Page
Loading...
