Version: 2020-09-04
26
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
3. CON_AUX4 / CON_R_AUX4 selected at COM 3
The following menus are added when you connect a CON_AUX4 or a CON_R_AUX4 relay card to the COM 3 port of the CS141
4. BUZZER selected at COM 3
The CS141 provides an additional buzzer for advanced acoustical alarm notifications. The following menus will appear when you
choose the Buzzer at COM 3 of the CS141:
6. BACS selected at COM 3
BACS
®
- the "Battery Analysis & Care System" - is the most advanced system on the market to manage stationary battery systems. It is
a standalone battery monitoring and management system that can be easily integrated into your network infrastructure.
With its intelligent web-technology configurable management technology, it cyclically checks the internal resistance, the temperature
and the voltage of each individual battery. In addition, it can readjust the charge voltage of each battery and manage environmental
readings (temperature, humidity, hydrogen gas content) as well as loads (UPS, inverters, and other devices). The accumulators are thus
always kept in the optimal working range.
Note:
Since the configuration of the system is independent to the rest of the functions, BACS functions are listed sepated at Part II of this
manual.
For more information and a detailed table of content about BACS, please refer to page 6 of this user guide.
To Next Page
Loading...
