Version: 2020-09-04
50
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
SNMP
For this configuration step, navigate to the following menu:
Developed by the IETF the Simple Network Management Protocol is designed for monitoring and controlling network elements from a
central station. The protocol controls the communication traffic between monitored devices and monitoring stations:
SNMP describes the structure of the data packets that can be sent as well as the entire communication process. The CS141 can fully
be integrated into a network with SNMP monitoring. The build-in SNMP agent regulates both - receiving and sending corresponding
requests.
Note:
SNMP V1.0 is not officially supported by the CS141. We recommend the use version 2.0 upward. However, since V1.0 is largely
included in V2.0, the CS141 will respond to SNMP-V1 requests, but using V1.0 will be out of official supporter’s guidance.
The CS141 supports SNMP v2 as well as SNMP v3
The difference that SNMP v2 and v3:
SNMP v2 works on behalf of legitimating an IP address inside user communities, SNMP v3 is based on direct user permissions with
name and password.
Configurating SNMP V2:
The overview shows all configured communities:
To configure new SNMP permissions, click +
To Next Page
Loading...
