English
8.1 Oil change.
1 Keep the engine running during 5 to 10 minutes for the oil to reach some
temperature and reduce its viscosity (more liquid). This way it will be easier to
extract it completely.
2 Place an appropriate container and tilt the equipment so the used oil is
completely drained.
3 Unscrew the oil draining screw/cap by turning counter clockwise and allow all
the spent oil to pour out.
4 Set the draining screw/cap and open the oil filling plug.
5 Refill the recommended oil (see page 8) to a level close to the maximum
level (without exceeding it). If the machine is leveled, the oil should not exceed
the level. The approximate oil amount is 0.4L.
OIL DRAINING SCREW/PLUG
OIL FILLING CAP
To Next Page
Loading...
