What to do if the GenerLink Switch will not transfer to the power present?
If the GenerLink switch won't transfer to the available power, first disconnect the generator. Then, reduce the load by turning off all circuits. Check that the yellow status light is on. Reconnect and restart the generator, restoring a load equal to or less than its capacity, and operate household loads using your generator. Do not attempt to fix it yourself.
Why does my GenerLink Switch continuously connect and periodically cycles the loads on and off?
If the GenerLink switch won't continuously connect and periodically cycles the loads on and off, it may be due to the load sensing feature. Disconnect the generator for a short period. Then, reconnect GenerLink through a 20-amp circuit.
What to do if GenerLink Switch has an abnormal condition that may require service?
If you observe an abnormal condition that may require service for your GenerLink switch, call for service, referring to the Terms and Conditions for instructions. Do not attempt to test or use the GenerLink with a generator until the condition is corrected. Also, do not attempt to remove and/or repair GenerLink yourself.
Outlines user responsibilities, safety, and property care for the GenerLink unit.
Covers liability, agreement finality, and governing law for GenerLink usage.
Details warranty coverage for the GenerLink unit and optional surge protection.
Explains the meaning of all status indicator lights on the GenerLink unit.
Guidance on choosing the right type and size of portable generator.
Details physical, electrical, operational, and feature specifications for GenerLink.
General| Category | Switch |
|---|---|
| Model | MA23-N |
| Amperage | 200 A |
| Voltage | 120/240 V |
| Connection Type | Plug-in |
| Weight | 5.5 lbs |
| Phase | Single Phase |
| Current Rating | 200 A |
| Frequency | 60Hz |
| Enclosure Type | NEMA 3R |
| Mounting | Meter Socket |
| Type | Transfer Switch |
To Next Page
