To Next PageTo Next PageWhat to do if the GenerLink MA24-N Switch will not transfer to the power present?
If the GenerLink switch won't transfer to the available power, first disconnect the generator. Then, reduce the load by turning off all circuits. Check that the yellow status light is on. Reconnect and restart the generator, restoring a load equal to or less than its capacity, and operate household loads using your generator. Do not attempt to fix it yourself.
Why does my GenerLink Switch continuously connect and periodically cycles the loads on and off?
If the GenerLink switch won't continuously connect and periodically cycles the loads on and off, it may be due to the load sensing feature. Disconnect the generator for a short period. Then, reconnect GenerLink through a 20-amp circuit.
What to do if GenerLink MA24-N Switch has an abnormal condition that may require service?
If you observe an abnormal condition that may require service for your GenerLink switch, call for service, referring to the Terms and Conditions for instructions. Do not attempt to test or use the GenerLink with a generator until the condition is corrected. Also, do not attempt to remove and/or repair GenerLink yourself.
Outlines warranties for GenerLink and surge protection.
Details starting the generator and choosing appliances.
Defines surges and methods for protection.
Highlights advantages of GenerLink surge protection.
Details necessary generator features and power quality.
Discusses determining generator size and output limits.
Lists estimated wattage for various appliances.
Provides detailed technical specifications for the GenerLink unit.
Compares GenerLink to traditional transfer switches.
Covers generator overload, placement, cords, and removal.
General