Need help?Do you have a question about the Genesis 1.2 and is the answer not in the manual?
Audio Specifications| frequency response | 16Hz to 36kHz, +/- 1dB |
|---|---|
| sensitivity | 91 dB 1 watt 1 meter |
| input impedance | 4 ohms (nominal) |
| bass amplifier power rating | Six channels per side @400 watts each |
Transducers| HF transducers | 26 Genesis 1” Circular Ribbon Tweeters (20 front, 6 rear) |
|---|---|
| midrange transducer | Single 75” Ribbon |
| LF transducers | Twelve Genesis 12” woofers with ribbed aluminum cones |
Weight and Dimensions| weight per side | approx.1, 000 lbs (450kg) |
|---|---|
| mid/tweeter wing dimensions | H 90” x W 41.5” x D 5” each |
| woofer tower dimensions | H 90” x W 15.5” x D 19” each |
Details the unpacking procedure for the G1.2 system's six shipping crates.
Provides guidance on optimal room placement for the G1.2 loudspeakers.
Describes the components of the 12-channel Genesis Servo-Controlled Bass Amplifier.
Explains how to connect the power to the amplifier modules using twist-lock connectors.
Details the process of connecting the woofer towers to the Servo-Amplifier Modules.
Explains how to connect the musical signal to the Control Module via Servo-Bass Interconnects.
Guides on connecting speaker cables to the crossover boxes for midrange and tweeters.
Information on using the supplied Logitech Harmony remote for system control.
Instructions on how to adjust bass volume and phase using the remote control.
Details the protection circuits within the servo-bass amplifier for speakers and amplifier.
Explains the function of the two control knobs on the crossover box for tuning.
Initial steps for adjusting bass level using the woofer amplifier volume control.
Guidance on fine-tuning the system for optimal imaging and soundstage reproduction.
Instructions for experimenting with different phase settings for the bass.
Additional adjustments for bass resonance, placement, and overall balance.
Recommendations for the system's break-in period and suggested discs.
Emphasizes making single adjustments at a time to assess their impact.
Addresses common issues like speaker spacing and soundstage depth.
Discusses achieving proper coupling for mid-bass energy between speakers.
Strategies for enhancing deep bass, including gain and crossover adjustments.
Guidelines for treating front walls, sidewalls, and rear walls for optimal sound.
Advice on fine-tuning the system and using listening skills to achieve balance.
Explains the core design principles of dipolar line source loudspeakers.
Details the unique design and performance of the Genesis ribbon tweeter.
Describes the 75-inch ribbon used for midrange frequencies.
Explains the benefits and technology behind the servo bass system.
Details the design and construction of the woofer towers.
Discusses the amplifier and crossover integration for the servo system.
Explains the design and components of the crossover network.
Describes the use of rigid Corian material for baffles and structural elements.
Specifies the G1.2's frequency range from 16Hz to 36kHz, +/- 1dB.
Details the speaker's sensitivity at 91 dB, 1 watt, 1 meter.
Provides dimensions for Mid/Tweeter Wing, Crossover, Woofer Tower, Amplifier, and Power Transformer.
Indicates the weight per side is approximately 1,000 lbs (450kg).
To Next Page
