53
CHARGING PROCESS
After inserting the battery into the charger’s insertion slot, the battery is charged automati-
cally (red LED glows continuously).
If too warm or cold a battery is inserted into the charger (red LED ashes), the charging pro-
cess starts automatically as soon as the battery has reached the correct
charging temperature (0°C to 65°C). The maximum charging current ows if the temperature
of the Li-ion battery is between 0°C and 65°C.
The charging time is between 1 min. and 60 min., depending on how much the battery has
drained (at 3.0 Ah).
If the battery is fully charged, the LED on the charger switches from red to green.
The battery does not need to be removed from the charger after charging. The battery can
continue to stay in the charger. This cannot overload the battery, and it keeps the battery
ready to use.
If both LEDs ash alternately, the battery is either not correctly placed or a malfunction of
either the battery or charger has occurred. For safety reasons, remove the charger and
battery from service immediately and have it checked by an authorized customer service
center.
ashing alternately
If the power adapter is overloaded, all LEDs ash 4 times. To be able to continue charging,
unplug the power adapter and plug it back in.
ashing simultaneously
To Next Page
Loading...