WWW.GENESISRESCUE.COM
58
E-FORCE combi devices, cutters and spreaders:
• Check the blades (for damage)
• Inspect the spreader tips (for damage)
• Check the control handle including the rocker lever (function)
• Check the handle (secure attachment)
• Check the protective cover (for damage)
E-FORCE rescue cylinder:
• Check the piston rod (for damage)
• Check the control handle including the rocker lever (function)
• Check the plungers (for damage)
• Check the guide piece (for damage)
SHUT-DOWN (END OF WORK)
Cutters:
After work is over, the blade tips must be placed one above the other to prevent injury. The
blades of the cutting device must not be completely closed, as otherwise tension will build
up in the device.
Rescue cylinder:
After work is over, the cylinder’s piston rod must be completely retracted, so as to relieve the
hydraulic load on the device.
Combi devices and spreaders:
After work is over, the spreading arms must remain slightly open, so as to relieve
the hydraulic load on the device.
To Next Page
Loading...