14
6. Bypasses
Ceramic Bypass
Before attaching the bypass to the valve, verify the meter is installed into the outlet side of the bypass
with the impeller facing in.
• As Figure 5-2 shows; install the seals into the animated connector.
• Attach animated connectors to the inlet/outlet and grease the O-rings.
• Attach the bypass valve and insert the clips.
• Meter cable is installed into cable port on outlet side during system start-up. See Pages 37-38.
Figure 5-2
Ceramic Bypasses
Ceramic Bypass
Ceramic Bypass
Genesis
2 Iron Pro Max Water Softener and Iron Filtration System Manual
To Next Page
