19
Programming: Filter Mode
Parameter Unit Default Description
Review Company Info Displays current programmed company information.
Language * English
Set Company Info * Set company information for display. Three lines available for input
Set Time of Day 24-hr. Clock Set current time of day. 24-hour clock format.
Set Date Set current month, day, and year. XX/XX/20XX
Set Regen Mode: A-07 *
A-03
A-07 Filter
Set Rinse Frequency F F-00 Set the number of additional rinses (backwashes) preferred.
Set Regen Time 24-hr. Clock 02:00 The time of day the system will regenerate when it reaches system capacity.
Set Backwash Time Min. 10
Set Fast Rinse Time Min. 10
Max Days for Regeneration Days 30
Signal Output Mode b-01 (02) * b-01 Used for external device. b-01. Disregard for standard installation.
Set Service Alarm * Days Disable
Alarm rings to prompt a service call. Occurs at the number of days set at 8pm
for 2 minutes. Display changes to prompt the homeowner to call their dealer.
Daily Usage Log Gal. Shows the gallons used each day for the last 7 days.
Daily Peak Usage Gal. Shows the highest gallon usage day for the last 7 days.
Weekly Usage Log Gal. Shows the gallons used each week for the last 52 weeks.
Weekly Peak Usage Gal. Shows the highest gallon usage week for the last 52 weeks.
Monthly Usage Log Gal. Shows the gallons used each month for the last 12 months.
Monthly Peak Usage Gal. Shows the highest gallon usage month for the last 12 months.
Review Regen Times Displays the number of times the valve has regenerated independently.
Review Software Ver.
Shows current software version of Genesis 2 Iron Pro Max valve.
Above parameters are located in standard program settings menu. (*) Denotes parameters located in advanced program settings menu.
Backwash time and rinse frequency is dependent on media and application.
Preset for you by dealer.
Preset for you by dealer.
Preset for you by dealer.
Genesis
2 Iron Pro Max Water Softener and Iron Filtration System Manual
To Next Page
Loading...