26
15. Turn a faucet on, away from the installation location, until the air from the plumbing lines has been purged.
16. Prior to fully starting up of your system. Please manually add 5 gallons of water to the brine tank.
17. Next add in 40lbs of water softener salt to the brine tank.
18. Allow at least 6 hours for water to dissolve salt. After 6 hours perform a manual regeneration.
19. After regeneration is complete your water softener system is now fully operational.
Genesis
2 Iron Pro Max Water Softener and Iron Filtration System Manual
To Next Page
Loading...